NON WOVEN DISCS CC-VRH 125 A 250 F (10)

P/N: 100050226
MPN: 42000060

Description

Suitable for universal work on moderate and coarse metal surfaces, e.g. removal of rough grinding traces, removal of oxidation and light deburring work.

Achieve matt and satin-finished surfaces.

Materials that can be worked:

  • Aluminium
  • Cobalt-based alloys
  • Other non-ferrous metals
  • High-temperature-resistant materials
  • Nickel-based alloys (e. g. Inconell and Hasteloy)
  • Bronze
  • Hard non-ferrous metal
  • Titanium
  • Titanium alloys
  • Copper
  • Soft non-ferrous metal
  • Brass
  • Stainless steel (INOX)
  • Thermoplastics
  • Fibre-reinforced duroplastics (GRP, CRP)
  • Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
  • Steel materials with a hardness over 54 HRC
  • Steel, cast steel
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Cast steel

Applications:

  • Roughening
  • Deburring
  • Surface work
  • Cleaning
  • Weld dressing
  • Structuring (matt finishing, brush matting and satin finishing)
  • Fine grinding in multiple steps

Drive types:

  • Angle grinder
  • Cordless angle grinder

Recommendations for use

  • For the best results, use at a recommended cutting speed of 15–20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
  • The addition of oil or water during grinding results in a finer finish, cooler grinding and longer tool life.

Additional information

Diameter

125MM

Brand

PFERD

MPN 42000060